Identifying Wood Finishes

No view

Simply apply more oil finish after removing wax or furniture polish with mineral spirits or soap and water. Start with alcohol. Apply a few drops of denatured alcohol to the furniture, as shown in the p.o above. No luck? Try lacquer thinner. Maybe you need a stronger solvent.. - Care Part 2- How to Identify the Finish and Why this Matters. When you want to revive dull lo.ng wood, you need to first identify what finish is already on the piece; mixing up finishes can be disastrous . Polyurethane, S.ac, Varnish and Lacquer - Use a cotton swab with . - To identify this type of finish do a simple scratch test. In a small, or easily hidden area of the wood and attempt to scratch off a small portion of the finish. If you notice that the finish comes up in small flake like patches then you know you have a varnish or s.ac type of finish. Wax.. - If you want to refinish a piece of wood furniture or even wood trim, the first thing you have to do is figure out what type of finish is on the wood. After you figure this out, .

To identify the type of clear film finish on a piece of furniture, you test it with solvents. See the chart below. To find out, just do the following. Note: Furniture on which there are oil finishes repairs easily. Simply apply more oil finish after removing wax or furniture polish with mineral spirits or soap and water..To identify this type of finish do a simple scratch test. In a small, or easily hidden area of the wood and attempt to scratch off a small portion of the finish. If you notice that the finish comes up in small flake like patches then you know you have a .To revive dull lo.ng wood, you need to first identify what finish is already on the piece; mixing up finishes can be disastrous..Here's a list of easy tests you can do to determine the different types of wood finish you may have on your floors or How To: Determine Different Types of Wood .

No related post!