Identify My Dana Axle

No view

The BOM will identify the model number, the gear ratio, the type of differential, and all component parts. Traditional BOM 's are 6 digits followed by digits and start with the numbers . On some tags, the first 2 digits don 't appear on the tag, but they must be used to identify the axle..

Introduction. This article is intended to collect together technical info and practical hands-on data about the venerable Dana 60 front axle..There's no question, the easiest way to identify the axle and gear ratio in your truck is from the door sticker. If you open the drivers door and look at the door jamb, you'll see a sticker like the one shown below: You'll see that the area labeled F is for the Axle Code..This is GenRight's Dana 60 low profile Rear Axle Bridge that is also designed to be an axle truss too! If you are Triangulating or linking the suspension on your Jeep, you will need a "Bridge" or Truss above the differential housing on the rear axle to mount the upper control arms..Upgrades Factory Options General: All AMC 20s have a 8 7/8" R P and use a 29 spline shafts. The AMC 20 R P is 3/8" bigger than the Dana 44, but it uses smaller shafts, smaller axles, and the CJ version comes with weaker two piece shafts..

  • Billavista Com Dana 60 Front Axle Bible Tech Article By

    Introduction. This article is intended to collect together technical info and practical hands-on data about the venerable Dana 60 front axle..

  • Identify Your Ford Truck Axle From The Door Sticker

    There's no question, the easiest way to identify the axle and gear ratio in your truck is from the door sticker. If you open the drivers door and look at the door jamb, you'll see a sticker like the one shown below: You'll see that the area labeled F is for the Axle Code..

  • Rear Axle Bridge Dana 60 44 Welded Genright Jeep

    This is GenRight's Dana 60 low profile Rear Axle Bridge that is also designed to be an axle truss too! If you are Triangulating or linking the suspension on your Jeep, you will need a "Bridge" or Truss above the differential housing on the rear axle to mount the upper control arms..

  • Jeep Axle Amc 20

    Upgrades Factory Options General: All AMC 20s have a 8 7/8" R P and use a 29 spline shafts. The AMC 20 R P is 3/8" bigger than the Dana 44, but it uses smaller shafts, smaller axles, and the CJ version comes with weaker two piece shafts..

No related post!